Ericsson AVP 4000 Скачать руководство пользователя страница 13

Страница: 13 / 422

Introduction

1/1553-FGC 101 1790 Uen Y

1-3

1.1

Introduction

1.1.1

Who Should Use this Reference Guide

This Reference Guide is written for operators / users of the Advanced Video

Processor (AVP) 4000. It describes the unit’s functions and operation. The

Reference Guide is written to assist in the installation and day-to-day operation and

care of the unit. Maintenance information requiring the covers to be removed is not

included.

Warning!

Do not remove the top cover of this equipment. Hazardous voltages are present

within this equipment and may be exposed if the top cover is removed. Only

Ericsson television trained and approved service engineers are permitted to service

this equipment.

Caution!

Unauthorized maintenance or the use of non-approved replacements may affect the

equipment specification and invalidate any warranties.

1.1.2

Software Version

This Reference Guide covers the functions of software

versions 9.31 and later

To verify the installed version either:

•

Access the front panel, see

Chapter 4, Front Panel Control.

•

Access the Web Browser screens, see

Chapter 5, Web GUI Control

This manual continues to be relevant to subsequent build versions where the

functionality of the equipment has not changed. Where the build standard changes

the functionality, a new issue of this manual will be provided. The appropriate

number should be quoted in all correspondence with Ericsson.

1.1.3

New Features in this Release

The 9.31 release of software supports the following features:

•

Four-slice encoding in HEVC UHD 4K.

•

Automatic switching to CALVC for bitrates above 50 Mbps, for HEVC encoding.

•

MGP support on systems using different subnet outputs.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 13 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: