Ericsson AVP 4000 Скачать руководство пользователя страница 220

Страница: 220 / 422

Web GUI Control

5-36

1/1553-FGC 101 1790

Uen

Parameter

Values

Description

VBI Line 6 - VBI Line

Off, VITS, WSS, WSS-AFD, Teletext System B,

Monochrome Samples

Specifies the content in the respective VBI lines. Set to Off

if the line in the incoming video does not carry any

information, VITC for Time Code, WSS for Wide Screen

Signaling, WSS-AFD for Active Format Detection and

Teletext System B for Teletext. Visible for 576i (625-line)

input streams.

VBI Line 23

Off, WSS, WSS-AFD

Specifies the content of VBI line 23 for 576i (625 line) input

streams.

Field 2

VBI Line 272 - VBI

Line 285

Off, VITC, Closed Captions, Monochrome

Samples

Specifies the content in the respective VBI lines. Set to Off

if the line in the incoming video does not carry any

information, Closed Caption for closed caption information.

Visible for 480i (525-line) input streams.

VBI Line 318 - VBI

Line 335

Off, VITS, WSS, WSS-AFD, Teletext System B,

Monochrome Samples

Specifies the content in the respective VBI lines. Set to Off

if the line in the incoming video does not carry any

information, VITC for Time Code, WSS for Wide Screen

Signaling, WSS-AFD for Active Format Detection and

Teletext System B for Teletext.

Aspect Ratio Conversion

The following parameters are available on the

ARC

tab of the

Properties

widget on the

Service Configuration

page when a video stream is selected on the

Outputs

widget. The

same parameters can be accessed through the

Advanced/EI9001/Video/Input/Video

Aspect Ratio (AR) Conversion

menu on the front panel.

Table 5.7 Aspect Ratio Parameters

Parameter

Values

Description

Use Input AFD

Off, On

If set to On, AFD codes present on the input will be used

to control the aspect ratio conversion.
If set to Off, the Default Aspect Ratio Conversion will

always be used.

Default Aspect Ratio

Conversion

Anamorphic, Center Cut, Letterbox

Specifies what aspect ratio conversion will be done if not

using the AFD codes present on the input.

Video Index

Off, On (Default), On (User)

Video Index Field 1

6 to 22

10 to 22

Specifies which line contains the video index in field 1.

Video Index Field 2

319 to 335

272 to 285

Specifies which line contains the video index in field 2.

SMPTE 2016

Off, On

Default Input Aspect

Ratio

4:3, 16:9

WSS-AFD

Configure using VBI lines section

Read-only, informative text.

Action on AFD lost

Convert as anamorphic and put AFD code 1000

out.
Convert as specified in Default and put AFD

code out.

Specifies what aspect ratio conversion is performed when

AFD is not present on the input

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 220 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: