Ericsson AVP 4000 Скачать руководство пользователя страница 207

Страница: 207 / 422

Web GUI Control

1/1553-FGC 101 1790

Uen

5-23

Figure 5.22 Remote Authentication and HTTP Server Option Properties

When authenticated, the user retains access to the AVP for that browser session. If

the session is closed, the user must re-authenticate. The AVP does not offer

different levels of access: once a user is authenticated, all functionality is available

to that user.

Table 5.4 LDAP Authentication Configuration Parameters

Parameter

Values

Description

Authentication

Off, Basic, LDAP Test, LDAP Authentication

Off: No user authentication is performed
Basic: the username and password presented on this page are

used to access the AVP web UI
LDAP Test: a short-term configuration of LDAP used to check

the settings. The settings will be applied for 2 minutes. The

user will be asked for username and password and the AVP

will attempt to authenticate these details against the LDAP

server. The results are printed on this page. After the test, this

setting will be turned to Off.
LDAP Authentication: user access to the web UI is controlled

through user authentication against the configured LDAP

server.

Disable HTTP Access

(HTTPS is always On)

Off, On

Off: Both HTTP and HTTPS access to the web UI is available

on the control interface.
On: Only HTTPS access is available on the control interface.
HTTPS uses a self-signed certificate and this cannot be

changed.

LDAP Host IP Address

The LDAP server’s IP address. The AVP does not support

DNS.

LDAP Bind Dn

The BIND distinguished name. This information must be

obtained from the administrator of the LDAP server.

LDAP Bind Password

The password for binding to the LDAP server. This information

must be obtained from the administrator of the LDAP server.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 207 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: