Ericsson AVP 4000 Скачать руководство пользователя страница 50

Страница: 50 / 422

Getting Started

3-14

1/1553-FGC 101 1790 Uen Y

3.7

How to Configure the AVP Using the Web GUI

The unit is configured using the web browser Graphical User Interface (GUI). For

details of all the GUI screens and options, see

Chapter 5, Web GUI Control

For details of supported web browsers please refer to the release notes

accompanying the software release.

3.7.1

General AVP Configuration

The configuration consists of two phases. First, the general parameters of the base

unit and the option cards are configured through the

Device Configuration

web

page. Then, the output streams can be configured through the

Service

Configuration

web page.

To save any changes made, click on the

Apply All

button located at the right side of

the user interface below the page tabs.

Note:

To save time, save the changes only after each parameter has been

altered. When trying to leave a page without saving the changes, a dialog is

displayed which allows saving or discarding the changes or abandoning the

page.

The modified folders in the

Advanced Video Processor Settings

widget and the

corresponding parameters in the

Properties

widget are highlighted in orange.

Moreover, the changes are also listed on the

Changes

tab of the

Information

widget. To undo a change, simply click on it in the

Information

widget. The

appropriate item shows up in the

Properties

widget and its original value can be

restored manually.

3.7.2

How to Enforce HTTPS

The AVP control interface can be used over HTTP or HTTPS protocols. The HTTPS

protocol is always available, and uses a self-signed certificate. It is not possible to

change this certificate.

HTTP is available by default, but an administrator of the unit can turn this off.

To turn off HTTP access:
1. Navigate to the

Device Configuration > Advanced Setup

page and select

Base Unit > Remote Authentication and HTTP server options

2. Change the control

Disable HTTP Access (HTTPS is always On)

order to disable HTTP access, thereby enforcing the use of HTTPS.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 50 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: