Ericsson AVP 4000 Скачать руководство пользователя страница 218

Страница: 218 / 422

Web GUI Control

5-34

1/1553-FGC 101 1790

Uen

Parameter

Values

Description

Black

Switches to a black test pattern on loss of video input.

Color Bars

Switches to a color bars test pattern on loss of video input.

No PID

The video PID no longer transmitted. SI is not updated.

Slate

Switches to the full Slate uploaded by the user.

Adaptive Pre-

processing

On, Off

Input filter to prevent excessive blocking, if the license

enabled.

MCTRF

Off, Default, Strong.

Available with the AVP/SWO/SD/PREMIUM or

AVP/SWO/HD/PREMIUM.

Horizontal Bandwidth

30 to 100%

Sets the video horizontal bandwidth filter.

Half Line Removal

Off, On

Enables or disables the removal of black half lines at the

top of the picture by substituting video data from adjacent

lines. The option is available when Video Input Format is

set to SD 576i25.

Logo

Logo file

The file to use as a logo. The selected file can be

uploaded by selecting the Upload option.

Logo insertion

Off, On

Controls if logos are displayed or not. The file to use can

be selected under Logo file.

A fixed logo position?

On, Off

Controls whether to use the default position for overlaying

the logo on the video.
If On, the position of the logo is fixed according to the

position held within the logo file.
If Off, the position of the logo is determined by the

coordinates entered in the X and Y position boxes.

The X position of the

logo

The position relative to left of the screen 0

(

number of

pixels per video line

logo width

- 1). If an invalid position

is specified, a logo display alarm will be generated.

Displayed only if a fixed logo position is set to Off.

The Y position of the

logo

The position relative to top of screen 0 (number of video

lines

logo height

- 1). If an invalid position is specified, a

logo display alarm will be generated. Displayed only if a

fixed logo position is set to Off.

Slate

Slate File

The file to use as a Slate. The selected file can be

uploaded by selecting the Upload option.

Advanced Slate Display Options

Freeze Frame

Detect

Off, On

Disables or enables delayed slate display upon detection

of frozen video frames. The feature uses hysteresis delays

defined next.

Time Threshold

Before Slate

seconds

The video component must be frozen for approximately

this number of seconds for the slate to be triggered by this

feature. A specific alarm is also raised while a slate is

displayed for this reason (see section 6.6.2.1).

Time Threshold

Before Recovery

seconds

The Freeze Frame condition is removed after this number

of seconds with active video. Please note: the slate may

remain on display for other reasons.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 218 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: