Ericsson AVP 4000 Скачать руководство пользователя страница 317

Страница: 317 / 422

Options, Licensing and Upgrades

1/1553-FGC 101 1790 Uen Y

7-13

7.10.1

Handling Modules

Caution!

Care must be taken to when inserting or withdrawing modules to avoid damage to

underside components.

Modules must be kept orthogonal, i.e. at 90 degrees to the unit, to avoid catching

underside components on the chassis.

Figure 7.9 Inserting and Withdrawing Modules

Caution!

Do not plug in modules with excessive force as this may result in damage to the

module connector or other components. If any significant resistance to inserting a

module is felt, withdraw the module slightly and check for obstructions.

7.10.2

Electrostatic Discharge

Warning!

Static electricity can damage electronic components. To avoid damage, keep

modules in their static-protective package until you are ready to install them.

To reduce the possibility of electrostatic discharge, observe the following

precautions:

•

Where possible ensure that antistatic protection is worn (for example an earthed

antistatic wrist strap, an ankle or heel strap).

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 317 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: