Ericsson AVP 4000 Скачать руководство пользователя страница 33

Страница: 33 / 422

Installing the Equipment

1/1553-FGC 101 1790 Uen Y

2-7

Table 2.7 Digital Video Input via the SDI Interface

Item

Specification

Connector types

Ω

female BNC

Connector designation

SDI 1-4

Pin-outs

Centre
Shield

Input
Ground/Chassis

Table 2.8 Lock LED State Descriptions

Item

Description

Off

The SDI Input is not active.

Red

The SDI input is active, but not locked.

Green

The SDI input is active and is locked.

Alternate Red and Green

The SDI input is active, but video with the wrong line standard is being received.

2.3.4.2

Digital Video Input (CE-HEVC/SFP Option Module)

The CE-HEVC/SFP option card can be fitted with one or

two SFP+ modules. If two modules are fitted, they must

be of the same type - a mixed population is not

supported.

SFP Copper

For the card ordered as CE/HWO/HEVC/SFP/C/A, two SFP+ modules are fitted

which have two miniature 75-ohm BNC connectors per module. High Definition and

Ultra High Definition 4K digital video can be input via the miniature BNC connectors.

For a single channel of HD, the input must be fed into the first connector of the first

module.

For a single channel of UHD 4K, the input is fed to all four connectors, and may be

presented to the input as either four synchronized HD quadrants, or as four

synchronized interleaved sub-pictures as per SMPTE-425-5.

SFP Fiber

For the card ordered as CE/HWO/HEVC/SFP/F/A, two SFP+ modules are fitted

which have two fiber optical inputs per module. High Definition and Ultra High

Definition 4K digital video can be input via the fiber optical inputs.

For a single channel of HD, the input must be fed into the first connector of the first

module.

For a single channel of UHD 4K, the input is fed to all four connectors, and may be

presented to the input as either four synchronized HD quadrants, or as four

synchronized interleaved sub-pictures as per SMPTE-425-5.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 33 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: