Operation via FOUNDATION Fieldbus
TM
iTEMP TMT85
76
Hauser
Parameter
Write access
with operating
mode
(MODE_BLK)
Description
Block Error
(BLOCK_ERR)
Read only
Displays the active block errors.
Display:
OUT OF SERVICE
The block is in the “Out of Service” mode.
The following block errors are only displayed in the Sensor Transducer
Blocks:
• OTHER
Additional information is available in the Advanced Diagnostic
Transducer.
• BLOCK CONFIGURATION ERROR
The block has been configured incorrectly. The reason for the
configuration error is displayed in the BLOCK_ERR_DESC1 parameter
• SENSOR FAILURE
Error at one or both sensor inputs.
An exact error description as well as information on rectifying faults is
provided in → 39.
Update Event
(UPDATE_EVT)
AUTO - OOS
Indicates whether static block data have been modified, including the
date and time.
Block Alarm
(BLOCK_ALM)
AUTO - OOS
Displays the current block condition with information on pending
configuration, hardware or system errors, including information on the
date and time when the error occurred.
• In addition, the active block alarm can be acknowledged in this
parameter group.
• The device does not use this parameter to display a process
alarm since this is generated in the BLOCK_ALM parameter of
the Analog Input function block.
Transducer Type
(TRANSDUCER_
TYPE)
Read only
Displays the Transducer Block type.
Display:
• Sensor Transducer Blocks: Custom Sensor Transducer
• Display Transducer Block: Custom Display Transducer
• Advanced Diagnostic Block: Custom Adv. Diag. Transducer
Transducer Type
Version
(TRANSDUCER_
TYPE_VER)
Read only
Displays the version of the Transducer Block type.
Collection
Directory
(COLLECTION_
DIR)
Read only
Displays the Collection Directory, always 0.
Transducer Error
(XD_ERROR)
Read only
Displays the active device error.
Possible display:
• No Error (normal state)
• Electronics Failure
• Data Integrity Error
• Mechanical Failure
• Configuration Error
• Calibration Error
• General Error
• The summarized device status/condition and more precise
information on the pending error(s) are available via the
manufacturer-specific error display. This can be read via the
“Advanced Diagnostic” Transducer Block in the
“ACTUAL_STATUS_CATEGORY” and
"ACTUAL_STATUS_NUMBER" parameters.
• An exact error description as well as information on rectifying
errors is provided in → 39.
Содержание iTEMP TMT85
