manualshive.com logo in svg

Eliet DZC600, Руководство пользователя

Поделиться
Скачать
Eliet DZC600 Скачать руководство пользователя страница 59

59

English

everywhere, including on the cables. 

•  Prior to lubricating, the cables must be cleaned. KLEENSPRAY is again an ideal tool. 
•  Also spray it into the cable guide and simultaneously move the cable back and forth to ensure 

that the cleaner penetrates the guide.

•  Use compressed air to clean the cable guide of both cleaner and dirt.
•  Repeat this procedure until the guides are completely clean.
•  New lubricant may now be sprayed into the guide. ELIET recommends NOVATIO PTFE OIL. 
•  The procedure is the same for all other friction surfaces mentioned earlier: first loosen old 

lubricant with KLEENSPRAY and wipe it away.

•  Then spray NOVATIO PTFE OIL on the friction part.

All lubricants indicated are available from your authorised ELIET dealer.

11.4.3   Belt tension check and adjustment

The DZC600 contains 2 belt drives: 

1.  Belt drive of the engine crankshaft to the angular gearbox. 
2.  Belt drive for blades

The following describes the procedure for tightening the belts.

Содержание DZC600














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды