Eliet DZC600, Руководство пользователя

Страница: 14 / 77

14
English
7.3.2 Careful and proper use
• The purpose of this machine is to renovate and rejuvenate an existing lawn. This is done by
removing any unwanted vegetation from the lawn and injecting new grass seeds into it. The
effect is a considerably higher proportion of young and healthy grass, giving your lawn a
better look and an increased resistance.
• The machine combines several functions that are executed in one single operation:
A. Preparatory work:
• Carve sowing trenches into the soil. (depth between 0mm and 15mm)
B. Sowing seeds:
• Gradually spreading the grass seed, the helix Seed Duct
TM
conducts the seed below the
projected stream of dirt and distributes it precisely above the hollowed-out grooves
through small pipes.
• Injecting the seed through the air generator.
• Closing the grooves and tightening the soil around the grass seeds with a back roller.
• Putting a protective layer onto the seed by covering the sown area with the projected soil.
Caution:
This machine is not intended for soil cultivation and must therefore be used only
for the above mentioned application.
• Overseeding requires physical effort that demands the concentration of the operator. It is
therefore advisable to take sufficient breaks as well as adequate food and drink.
• It is unsafe for persons with heart problems and/or balance disturbances to operate the
machine.
• Think about what you are doing at every manoeuvre. Do not be tempted to let routine dull
your attention. Never act impulsively or on reflex.
• Although the machine is equipped with extensive safety features, please avoid seeking out
any dangers. (read “15.2 Hazard analysis” on page 73)
Warning:
Most accidents are caused by carelessness or reckless behaviour.