manualshive.com logo in svg

Eliet DZC600, Руководство пользователя

Поделиться
Скачать
Eliet DZC600 Скачать руководство пользователя страница 33

33

English

9.6.3 Overseeding 

Caution: 

The operator must comply with clothing prescriptions and wear the required 
personal protection (see §. “7.3 

Safety instructions” on page 13)

•  Proper gardening starts with studying the work area, removing any obstacles and determining 

a work pattern and a route (read § “9.6.2  Planning and determining the track and the work 
pattern.” on page 32). It also involves proper preliminary machine inspection and settings 
(read §”9.1  Preliminary checks” on page 20 en “9.4 Preparing the machine” on 
page 24). 

•  The overseeding procedure can start as soon as the machine is on the work area, at the 

beginning of the defined route. 

•   Always situate the machine to move in a straight line relative to the intended lane; it avoids 

having to immediately turn and adjust course whilst the blades are protracted to at work 
depth.

•   Set the motor to full throttle (3,200 RPM)
•   The machine now becomes a dangerous object, requiring the operator to concentrate on his 

movements. As long as he is operating the machine, his full attention must be on the job.

•  Now, let the machine drop down from transport mode to 

operation mode.

•  It is recommended to regularly clean the areas between the 

rollers, using the supplied tool.

9.6.4 Dethatching

The overseeder can also act as a dethatcher. The following items 
must be taken into consideration:

•  De blades of the seeder are mounted in the perfect position 

for overseeding with the machine. This position means that 
for every blade disc 2 blades cut grooves in the ground for the 
seed injection, the third blade is mounted in a pulling position

•  To have a maximum return at scarifying it is necessary to make 

a choice in the position of the blades. This has an effect on 
overseeding with the machine. The ideal position for scarifying is 
to mount the tree blades in the pulling position

 

Содержание DZC600














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды