Eliet DZC600, Руководство пользователя

Страница: 49 / 77

49
English
it with the screw.
• Slide the front filter over the cartridge again.
Caution:
Releasing a stream of compressed air too closely to the filter element may
cause micro-perforations that will render the filtering properties completely
useless.
• Using compressed air, completely clean the plastic hood and the filter socket from dust and
dirt.
• After cleaning, remount the filter elements in their original position.
11.3.2 Changing the air filter
This action is almost identical to cleaning the air filter (see “11.3.1 Cleaning the air
filter” on page 48). The only difference is that in this case, the element is replaced.
New air filters suitable for your machine are available from your ELIET dealer or an authorised
service centre of the relevant motor brand.
11.3.3 Checking the oil level of the motor.
A shortage of engine oil will irreparably damage the engine. Hence, regular checks should be
carried out.
• Place the machine on flat ground so that the engine plate is completely horizontal.
• Switch off the engine.
• Take a clean cloth.
• Remove the dipstick and clean it with the cloth (the oil
level at the initial measurement is not always correct).
Therefore, the dipstick needs to be re-inserted and
pulled out again. The oil level should reach the “F” (Full)
mark.
• If this is not the case, please replenish the oil (Caution:
do not overfill).
• Before replenishing the oil, please clean the area around
the filler cap.
• Open the filler cap and remove the dipstick to allow ventilation in the crankcase.