Eliet DZC600, Руководство пользователя

Страница: 53 / 77

53
English
Take the following steps to verify ignition quality:
1. Put the spark plug cap back on.
2. Grab the rubber of the spark plug cap and press the outermost electrode against a large part
of the motor.
3. Pull the starter cord.
4. Meanwhile, check for sparks between the two electrodes.
5. If the spark is a clear, continuous, bright beam and is nicely centred between the electrodes,
then the spark plug is still good.
6. Weak, irregular and not well-centred sparks indicate that the spark plug must be changed.
Caution:
Replacing an old spark plug or putting in a new one must be done with utmost
caution, avoiding any possible damage to the screw thread in the cylinder.
• Secure the spark plug with a torque of 20Nm.
11.4 Machine maintenance
11.4.1 Visual inspection
It is essential before commencing the work that the machine undergo an inspection. This will
allow you to anticipate breakage or wear and tear that affects the life span of the machines.
• Check whether the machine operates at the proper rotational speed at full throttle (3200
RPM)
• Never attempt to change the default settings of the motor.
• Inspect the blades. Blades may bend on impact with a hard object under the surface. To avoid
damage to the lawn, these types of blades must be straightened out again (Read § “11.4.8
Checking the blades” on page 65)
• Check that there is no build-up of dirt in the blade compartment.
• Check if the depth setting needs to be adjusted to compensate for the wear and tear on the
blades (read § “9.4.1 Machine set-up” on page 24)
• Check that the chains are lubricated enough (read § “11.4.2.3 Chains and gears” on page
57)
• Check that no parts have been deformed, that welded seams are not cracked and that parts
are not excessively loose.
• If problems are found, carry out the necessary repairs or maintenance first.