manualshive.com logo in svg

Eliet DZC600, Руководство пользователя

Поделиться
Скачать
Eliet DZC600 Скачать руководство пользователя страница 19

19

English

8. Dealer’s duties 

Each ELIET DZC600 overseeder combi that leaves the factory has been subjected to a test run 
and checked for all functionalities. The machine is then packed for transport.

•  The dealer unpacking the machine will check it for any damage occurred during transport.
•  The machine will be filled up with petrol (Read§”9.4.2 Refuelling” on page 28)
•  Prior to delivery to the customer, the dealer will check the oil level in the motor (Read “11.3.3   

Checking the oil level of the motor.” on page 49).

•  The dealer checks that the RPM setting is at the correct level of 3,200 RPM.
•  The dealer leaves the machine to run for a few minutes and checks that all devices function 

properly.

•  The dealer will set the correct depth in advance  (read §”9.4.1  Machine set-up” on page 

24) 

•  Every ELIET dealer warrants a long life span of ELIET machines. He will lubricate all grease 

nipples before delivering the machine to the client. (Read §”11.4.2 

 

General 

lubrication treatment” on page 54)

 
•  Important information for the new owner at the time of delivery:
a) The dealer familiarizes the new owner with the machine’s operation.
b) The dealer informs the new owner of potential dangers.
c) The dealer insists that the machine be returned for first maintenance after 10 hours of opera-

tion.

d) The dealer indicates the points that require regular lubrication.
e) The dealer ensures that the warranty card is filled out and signed. This is a precondition for 

any warranty claim. Please read the attached warranty conditions for more details.

f) Since the customer would be able to make a claim under warranty, the customer shall register 

the purchase on the ELIET website: 

www.eliet.eu.

Содержание DZC600














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды