manualshive.com logo in svg

Eliet DZC600, Руководство пользователя

Поделиться
Скачать
Eliet DZC600 Скачать руководство пользователя страница 55

55

English

11.4.2.1 Hinges 

Hinges are places where two moving parts are attached to each other. Because this is a turning 
point, it involves friction. Friction without lubrication leads to wear, excessive play and finally in 
breakage. Some of these items require specific attention:

1. 

Hinge of the belt tensioners

2. 

Hinge of the front wheelbase (L & R)

3. 

Hinges of the levers

4. 

Hinges of the protective cover at the back (L & R)

Lubricating the hinges: 

•   To reach the points indicated, some protective covers and shields will have to be removed 

(Read § “15.1 Removing the protective covers” on page 71 if necessary)

•   To avoid wear and subsequent play on hinges, lubricant must be applied to the contact sur-

faces that undergo friction. 

•   Before applying fresh lubricant, it is essential to first clean off any old, dirty lubricant and 

remove any dust sticking to the hinge.

•   Where possible, the hinging parts must be disassembled for proper cleaning of all elements 

within.

•   To dissolve lubricant,spray the product onto the hinging parts. Leave the product for a few 

minutes to enable it to perform its degreasing action. 

•   Wipe the parts clean. Repeat the procedure if necessary to ensure that the parts are complete-

Содержание DZC600














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды