Eliet DZC600, Руководство пользователя

Страница: 41 / 77

41
English
• The safety lock remains stuck after operation: check, clean, or replace the locking mechanism
as necessary.
• The cable that operates the locking mechanism or the locking mechanism itself is unwillingly
overpowered by some obstacle or another (for example, when passing by a bush or shrub, etc.)
• The locking mechanism cable is too tightly stretched. Ease up on the cable tension.
9.8.8 The machine remains locked in its set height (transport or operation mode).
If during operation or overseeding, the machine fails to respond to the command to return to
either transport or operation mode, then the following may have occurred:
1. The machine remains stuck in work mode:
• The hinges of the front roller body are stuck because of dirt or insufficient lubrication:
clean the hinge and apply lubricant liberally.
• Dirt is piling up between the front roller body and the frame of the machine: thoroughly
clean the gap between the front roller body and the frame.
• The cable that operates the locking mechanism is too loose or broken. Adjust or replace it
if necessary.
2. The machine remains stuck in transport mode:
• The hinge of the front roller body is stuck because of dirt or
insufficient lubrication: clean the hinge and apply lubricant
properly.
• Dirt is piling up between the front roller body and the frame
of the machine: thoroughly clean the gap between the front roller body and the frame.
• The cable that operates the locking mechanism is too loose or broken. Adjust or replace it
if necessary.