Eliet DZC600, Руководство пользователя

Страница: 18 / 77

18
English
• Inspect the machine prior to every job. (Read § “9.1 Preliminary checks” on page 20
en § “11.4.1 Visual inspection” on page 53)
Any defects must be repaired immediately.
• Always ensure the motor is switched off before performing repairs or maintenance. Always
wait until the blades have come to a full stop before performing any action whatsoever.
• If parts must be replaced as a result of wear or failure, you must always turn to your author-
ised ELIET dealer for original replacement parts. This is of key importance for your own safety.
Warning:
Repairs, maintenance and cleaning must only be performed with the motor
disengaged and the spark plug cap decoupled.
7.3.8 Limits of the machine
• ELIET recommends a maximum work depth of 15 mm. In view of your own safety and a long life
span of your machine, increasing the work depth is not recommended.
• The DZC600 should not be used at low temperatures or when there is frost forming.
• The machine weighs 124(*) kg. Please take this into account when transporting the machine.
• The minimum passage width is: 800 mm
(*) = weight of the machine with an empty seed reservoir
7.3.9 In harmony with nature
• Use the machine in a manner that respects environmental regulations:
a) Avoid running the machine without actively using it.
b) Avoid spilling petrol whilst refuelling.
c) Oil leaks in the motor or transmission should be repaired immediately.
d) Service the motor regularly for optimum combustion.
e) Any waste materials resulting from performing maintenance on the machine should
always be disposed of properly and in their designated place either for recycling or other
environment-friendly processing.