manualshive.com logo in svg

Eliet DZC600, Руководство пользователя

Поделиться
Скачать
Eliet DZC600 Скачать руководство пользователя страница 46

46

English

These characteristics are important to properly carry out maintenance works.

Caution: 

Maintenance performed in an incorrect manner may compromise the operator’s 
safety.

•  Maintenance should be always carried out with the motor turned off. As a precaution, the 

spark plug should also be removed or the lead detached.

•  Wear safety gloves as much as possible when performing maintenance. Safety goggles may be 

required for certain operations. These are supplied standard with the machine.

TIP: 

In principle, the maintenance works described may be carried out by any person with 

technical skills. However, ELIET recommends that the machine be brought to an authorised ELIET 
service centre for a major overhaul each year. 

Your ELIET dealer is always ready to carry out maintenance and provide advice. He stocks genu-
ine ELIET replacement parts and lubricants. His staff can always obtain advice and service from 
ELIET’s help desk in order to provide you with impeccable after-sales service.

Содержание DZC600














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды