manualshive.com logo in svg

Eliet DZC600, Руководство пользователя

Поделиться
Скачать
Eliet DZC600 Скачать руководство пользователя страница 31

31

English

9.6  Working with the machine

9.6.1  Driving the machine

Warning:

Never let the motor run in a closed space in view of the risk of carbon monoxide 
poisoning from the exhaust.
If the machine is stored inside, doors and windows will be opened for maximum 
ventilation before starting the motor to move the machine.

9.6.1.1 Driving

The DZC600 is equipped with a powered drum roller, which can be operated by the bottom right 
lever.

The machine can be moved in work mode or in transport mode

A. In transport mode

, the blades will be lifted up to their maximum height. 

B. In operating mode

, the blades are set to their work depth. Because in this mode the 57 

blades are cutting through the top layer of the lawn, any sudden changes of direction must 
be avoided, as these could result in the removal of parts of the lawn.

9.6.1.2 Turning

If you have reached the end of a strip and you wish to turn to overseed the adjoining strip, the 
machine will have to be turned 180° degrees within a limited amount of space. 

To turn around with the DZC600, the seed container needs to be shut. Push the steering gear 
down, so that the front wheels are lifted 2 cm above the soil and the machine is resting only on 
the drive roller. Keep the wheel drive activated and turn the machine so that it’s ready to start a 
new strip. Lower the machine into work depth again and re-open the seed container to continue 
the overseeding.

2 cm

Содержание DZC600














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды