Eliet DZC600, Руководство пользователя

Страница: 39 / 77

39
English
continue to do work on an incline. After checking the oil level on an even surface (read “11.3.3
Checking the oil level of the motor.” on page 49) the oil safety system may be disengaged
temporarily. Don’t forget to switch it back on after the work is finished.
Warning:
Neither ELIET, nor SUBARU shall accept warranty claims based on a lack of oil
in the machine.
If slopes are a recurring factor in a particular area, adding 0.2 litres of extra oil
to the tank will resolve the problem.
d) Technical defect
If neither of the aforementioned checks identifies the cause, the problem could be more techni-
cal in nature. A defect in the motor or a problem with the carburettor could be the issue. For as-
sistance with these problems, please visit your authorised ELIET dealer or an authorised service
centre for the motor brand.
9.8.3 Loss of seed during transport
During transport, the machine leaves a trail of grass seed. This can result in vegetation between
paving stones and must therefore be avoided. Possible causes:
• During transportation, the machine’s dosing plate was bent, which also
caused the lid to bend. Bend both of them straight again, or have these
machine parts replaced.
• Closing the seed container lid happens by means of a tension spring.
If this tension spring is broken or has come loose for a specific reason,
the seed container will not shut itself. This will result in unwanted grass
seed spillages.
• It can also occur that the operating cable was tightened too much or got stuck for one reason
or another.
• As a result of dirt caking up under the sliding lid of the seed container, the spring may not be
strong enough to shut the lid. Clean the gaps in between the sliding lid (with compressed air)
when the seed container is empty.