manualshive.com logo in svg

Eliet DZC600, Руководство пользователя

Поделиться
Скачать
Eliet DZC600 Скачать руководство пользователя страница 13

13

English

Sturdy construction:

 

The robust construction is testimony to the sustainability of the machines and offers a guarantee 
for the operator’s safety under unforeseen circumstances.

Noise reduction: 

 The powerful motor that provides increased torque by means of a built-in 

reduction gearbox, takes away the need to work at full throttle. It also decreases the noise by 
a few decibels. Additional interior rubber cladding absorbs the impact on the plate, resulting in 
reduced noise and protecting the shields at the same time.

7.3  Safety instructions 

7.3.1  General safety instructions

•  The owner of the machine will keep this manual during its complete service life. A reference 

guide for the user, it also ensures that the machine is used and maintained correctly at all 
times. Always refer to this instruction manual if you have any doubts about operations that 
you are about to perform.

•  Always observe the applicable regulations of the Labour Inspectorate to avoid accidents. 
•  If the instructions stated in this manual are not clear to you, do not hesitate to contact your 

ELIET dealer for further explanation. The help desk at ELIET NV/SA is at your service to 
answer all of your questions. (EU +32 56 77 70 88 - USA 412 367 5185 ). ([email protected])

•  Under no conditions whatsoever may the original design of the machine be modified without 

explicit and written consent of ELIET EUROPE NV/SA.

•  Always observe all safety instructions when using this ELIET machine! Carefully read all 

the instructions relating to the operation of the machine. They are important for your own 
personal safety.

•  Read the chapter meant for the dealer  (read 

“8. Dealer’s duties” on page 19

) and immedi-

ately verify whether the machine has been delivered in accordance with the instructions.

•  Get advice from the dealer or another professional when purchasing the machine.

For your information:

Also read through the safety instructions in the SUBARU motor manual. It 
contains useful tips about proper use and maintenance of the motor.

•  Read and observe all safety messages labelled on the machine. (for the sticker location, 

“7.1 

Safety messages:” on page 10

)

Содержание DZC600














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды