Eliet DZC600, Руководство пользователя

Страница: 26 / 77

26
English
• Return the machine to transport mode, and move the machine backwards by 1 meter so that
the grooves under the machine become visible.
• Measure the grooves at various places and compare the measurements to your desired work
depth.
• Adjust as needed.
Caution:
• Due to wear and tear on the blades, it is advised to regularly check and (if
needed) adjust the work depth before starting the work.
• If the soil is fairly moist, you should decrease the depth setting to prevent
too much soil being milled. This moist soil will accumulate inside the ma-
chine and interfere with the normal functioning.
Setting the sowing rate
1. The engine must be turned off prior to refilling the seed container.
2. Three things must be checked before refilling the seed container:
o Verify that the scattering outlets underneath the seed container are not blocked and that they
are free of condensation and moisture. Moisture would cause the seed to stick, resulting in
blockage of the seed outlets.
o Check whether the seed container lid closes properly when the machine is in transport mode.
This is to prevent any unwanted seed spillages when in transit.
o Check the sides of the seed container for moisture.
3. The seed must be sieved when refilling the seed container to remove any foreign objects (small
stones, sticks, grass clippings) that could otherwise prevent proper closing of the seed outlets.
Caution :
It is strongly advised not to transport the machine when the seed container is
full. The jack continuously rotates in the seed container, and the pressure that
builds up as a result, could seriously damage the machine.
Do not fill the seed container until you have arrived at the sowing site. Also
make sure to empty the container every time the machine is relocated.
Keep the seed container filled up above the vertical funnel to ensure a constant and even spread.
Before spreading the seed, you must set the desired sowing volume. The quantity of seed in kg
needed per 100 m2, will depend on the instructions of the seed supplier, the type of seed and the
landscaper’s experience.