Eliet DZC600, Руководство пользователя

Страница: 34 / 77

34
English
34
• The preparations with respect to the machine and work area listed for the overseeding
procedure also apply to dethatching.
• It is recommended to cut the grass very short before dethatching.
• Contrary to overseeding, dethatching is a superficial operation. The objective of dethatching
being to mechanically remove all parasites (moss, felt, weeds, dried grass, etc.) from the lawn,
the blades should only make slight contact with the soil (max. 3 mm)
• Since we have yet to do any overseeding, no seeds should be in the seed reservoir.
• Machine operation is identical to that for overseeding.
• Because dethatching requires less capacity than overseeding, a higher work speed is allowed.
• The same routes can be applied as for overseeding.
• In case of excessive amounts of moss it is recommended to make two runs of the entire
surface, the second one perpendicular to the first.
• During dethatching, the seed grooves may get filled with debris. It is therefore recommended
to clean out the seed grooves after dethatching and prior to
overseeding.
• Scarifying work leads to build-ups of dirt between the rollers.
Therefore, it is necessary to stop regularly and clean the areas
in between the rollers with the supplied tool.