Edirol PR-1000HD, Руководство пользователя

Страница: 93 / 132

93
Practical Use of the PR-1000HD —
Controlling Other Devices with the PR-1000HD
Practical Use
■
Controlling Another Presenter
You can control a number of other Presenters (such as other PR-1000HDs or the DV-7PR) from the PR-
1000HD. With the PR-1000HD’s control function enabled, you can make settings for transition effect
times and for selecting palettes and clips.
Set the PR-1000HD as the master, and the other Presenter as the slave. Connect the PR-1000HD and
the Presenter functioning as the slave to a UM-1 or other USB MIDI interface, and use a MIDI cable to
connect the MIDI OUT of the MIDI interface for the master PR-1000HD to the MIDI IN of the slave
Presenter.
* If you’re using the PR-80/50 as a slave, connect the PR-80/50 to a USB MIDI interface such as the UM-1.
1.
Set the Device ID for the slave Presenter.
For instructions on how to set the Device ID, refer to “About System Exclusive Messages” (p. 92).
2.
Click the [MIDI Preferences] button in Play mode or Edit mode on the master
Presenter.
3.
Set the Device ID used for Presenter Control.
Match this to the slave’s Device ID.
fig.midi14.eps
4.
Check the “Presenter Control” check box.
The Presenter Control function is enabled, and the PR-1000HD is set as the master.
5.
Click the [Done] button.
Controlling Other Devices with the PR-1000HD
If you want to control another
Presenter, start up the slave
Presenter, and in “MIDI
Preferences,” set “System
Exclusive Messages” to the
appropriate device ID (p. 92).
Then make settings for the
master Presenter from step 1.
When set to Broadcast, control
messages can be transmitted,
regardless of the slave
device’s settings.
Select Device ID
Mark the checkbox
If control is not successful, try
turning the control function off
(un-checking it), then turn it on
again (check it again).
PR-1000HD_e.book 93 ページ ２００８年１月２１日 月曜日 午後８時３５分