Edirol PR-1000HD, Руководство пользователя

Страница: 70 / 132

70
Practical Use of the PR-1000HD —
Making the Settings for the Project
Using the Keyboard Shortcuts
• Shortcut key + [Shift] + [
←
]: Go back 10 frames
• Shortcut key + [Shift] + [
→
]: Advance 10 frames
• Shortcut key + [
←
]: Go back 1 frame
• Shortcut key + [
→
]: Advance 1 frame
3.
After deciding on the frame, set the In point or Out point as shown below.
Right-click the time slider
fig.clip02.eps
A context menu appears, and you can then make the following settings.
• [Set in point]
• [Set out point]
Using the In Point and Out Point Settings Icons
fig.clip05.eps
• Sets the In point
• : Sets the Out point
• : Plays back from the In point to
the Out point
Time slider
Context menu
When you play back an HDV
clip, the following phenomena
will occur on the PR-1000HD.
- There will be no sound for
the first few and last few
frames of the clip.
- If you loop the clip
playback, the image will
stop for several frames at
the out-point of the clip
In order to minimize the effect
of such phenomena, you
should capture (p. 76) or
import (p. 77, p. 78) so that
there are several seconds of
silence at the beginning and
end of the material, and
specify the in-point and out-
point (p. 68) when you create
the clip so that several frames
of silence are created at the
beginning and end of the clip.
Sets the In point
Sets the Out point
PR-1000HD_e.book 70 ページ ２００８年１月２１日 月曜日 午後８時３５分