Edirol PR-1000HD, Руководство пользователя

Страница: 90 / 132

90
Practical Use of the PR-1000HD —
Controlling Presenter with MIDI
4.
If controlling the playback speed via MIDI, set the MIDI message to be used in
“Speed Control” (controls are not accepted via MIDI when this is set to [OFF]).
The playback speed is controlled with the selected MIDI message.
fig.midi02.eps
When controlling the playback speed, set the “Speed Control Range” (the value is set in terms of
a range of multipliers that can be applied to the standard speed).
fig.midi03.eps
Numerals in the “Speed Control Range” indicate, from left to right, the minimum MIDI value (0),
center value (64), and maximum value (127). When selecting a range starting from 0 in the “Speed
Control Range,” playback is paused when the value is set at 0.
5.
If the transition effect time is controlled via MIDI, set the MIDI message to be
used in “Trans. Time Control” (controls are not accepted via MIDI when this is
set to [OFF]).
The transition effect time setting is controlled with the selected MIDI message.
fig.midi04.eps
The transition effect time (0.0–4.0 seconds) corresponds to the MIDI value (0–127).
Select a MIDI message
Speed Control Range
Select a MIDI message
For more details about
selecting the transition effect
time, refer to “Transition
Effects” (p. 56).
PR-1000HD_e.book 90 ページ ２００８年１月２１日 月曜日 午後８時３５分