Edirol PR-1000HD, Руководство пользователя

Страница: 18 / 132

18
Before Using the PR-1000HD
Start by connecting the devices you will be using, such as video and audio devices used for output and
monitoring and the displays used for your operations. Whenever connecting devices, always be sure
to have the power turned off first. Connecting equipment with the power turned on may cause
malfunctioning and other problems.
If you want to connect HDV equipment, please use the IEEE1394 cable (DV cable, sold separately).
If you want to connect VTR equipment or HD equipment, please use the Edirol VC-300HD/VC-
200HD. This will allow various video formats to be converted into the optimal HDV format for capture
by the PR-1000HD.
fig.connection.eps
921
• To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before making any connections.
Connecting a removable hard disk drive unit
Connect removable hard disk drive units using the procedure described in “About the Removable
Hard Disk Drive Units” (p. 121).
Setting Up and Connecting Equipment
You can select either digital
(DVI-D) or analog (DVI-A or
VGA) as the output from the
RGB OUTPUT connector. Use
the ANALOG/DIGITAL select
switch to make this selection.
If you want to send the output
from the PR-1000HD’s RGB
OUTPUT connector or
DISPLAY OUT connector to a
VGA connector (D-sub 15-pin
connector), use the included
DVI-VGA adaptor.
R L R
L
RS-232C
IN OUT
IN OUT THRU
/
/
Mouse Keybord
DVI-I Connec
AC power outlet
Video Audio
DVI-I Connector RCA pin connector
Audio
XLR connector
Display for operation
Display for monitor/output
PR-1000HD_e.book 18 ページ ２００８年１月２１日 月曜日 午後８時３５分