9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev D
SECTION 2
GETTING TO KNOW YOUR ARMOR X10GX
Page 50 of 234
ARMOR X10gx Tablet Computer
Two vehicle docks are available that are specially designed for the X10gx: an
RF dock
(P/N
9800F26200-0000) and a
Non-RF dock
(P/N 9800F26200-1000). The RF dock is equipped
with two RF docking connectors to allow the X10gx to use an external WWAN antenna and an
external GPS antenna. The non-RF dock does not have the RF connectors. Both vehicle docks
utilize a remote breakout box that provides external cable connections.
ARMOR X10g x Ve h ic le Do c ks
Figure 27 shows the X10gx RF dock, breakout box (P/N 9800F45795-0000) and six-foot 50-pin
cable (P/N 8900F51236-0000). The breakout box separates the various signal lines from the
docking connector and routes them to standard interface connectors on the box. It is connected
by the cable to the docking connector at the back of the vehicle dock. Two RF cables are
connected to two RF docking ports on the face of the dock. These cables are then connected to
external antennas in a vehicle.
The X10gx dock can be mounted on a vehicle cab wall, console or on a ball mount assembly.
There are four mounting holes in the dock that meet the VESA 100 mm hole pattern, as shown
in Figure 27. There is also a mounting bracket (DRS P/N 0410F49462-0000) that can be
attached to the back of the dock so it can be mounted vertically on a horizontal surface or on a
ram ball plate, as shown in Figure 28 and Figure 29.
Figure 27. X10gx RF Dock, Breakout Box and Cable
EXTERNAL
ANTENNA
DOCKING
CONNECTORS
BREAKOUT
BOX
VESA 100 MM
PATTERN
MOUNTING
HOLES (X4)
50-PIN
CABLE
RF DOCKING
CABLES
