9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev D
SECTION 5
YOUR ARMOR X10GX SOFTWARE
Page 129 of 234
ARMOR X10gx Tablet Computer
S c re e n S e tu p Dia lo g
NOTE
If you have a pen screen only display, this dialog will not be accessible
from the ARMORutils Main window.
The Screen Setup dialog (Figure 74) is used to select the current display mode and to access
calibration routines for both the touch and pen screens. There are three display modes:
Dual
,
Touch Only
and
Pen Only
. The example below shows the system is in Dual Mode (Dual mode
option grayed out), which means both the Touch Only and Pen Only modes are available.
Figure 74. ARMORutils Screen Setup Dialog Window
S c re e n Mo d e Op tio n s
These options allow you to select the current display mode. For example, click on the
Touch
Only
button to enable only the touch screen and disable the pen screen. Click
OK
to change to
the new mode. The Touch Only mode option will become grayed, as illustrated in Figure 75.
