DRS Technologies Armor X10gx, Руководство пользователя

Страница: 31 / 233

9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev D
SECTION 2 GETTING TO KNOW YOUR ARMOR X10GX Page 30 of 234
ARMOR X10gx Tablet Computer
There are six LED status indicators located on the indicator panel at the upper right of the
X10gx display as shown in
In d ic a to r P a n e l
Figure 3 ( NOTE: The seventh object to the far right of the panel is
the ambient light sensor (ALS), not an LED). The functions of these indicators and the function
of the ALS are described below (see
Indicator State Summary for a complete description of
each indicator state).
Figure 3. Indicator Panel
A blue LED that indicates when the WI-FI radio is connected to a network
WI-FI In d ic a to r
A blue LED that indicates when the GPS module is powered on and enabled.
GP S In d ic a to r
A blue LED that is on steady when the WWAN radio is connected to a network.
Wire le s s Wid e Are a Ne two rk (WWAN) In d ic a to r
A blue LED that is on intermittently when any storage media such as the solid-state drive or an
optional flash drive is accessed.
S to ra g e In d ic a to r
This amber/red LED has the following conditions:
Ch a rg in g /Fa u lt In d ic a to r
•
Off when the tablet is powered up and external power is not connected.
•
On steady amber when external power is connected and batteries are fully charged.
•
Flashing amber at a 1-second rate when either or both batteries are charging.
•
On steady red if a power system error occurs, such as an overvoltage, undervoltage or
overcurrent condition or a battery failure.
A blue LED that indicates when the X10gx is in the powered on state. It also flashes slowly in
sync with the Power button LED when the tablet is in Sleep mode.
P o we r On In d ic a to r
WI-FI GPS WWAN STOR
C/F PWR
ALS