Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 72 / 617

70
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
Public mode is an auto-answer service that puts importance on manners
in public spaces. Once you activate Public mode, the guidance is played
back telling that you cannot answer the call as you are currently driving
or in a place where you should refrain from speaking on the phone (a
train, bus, movie theater, etc.). Then the call is disconnected.
≥
Voice Mail Service
※ 1
, Call Forwarding Service
※ 1
, and Caller ID Display Request
Service
※
2
work taking priority over Public mode.
※ 1 If a ring time is set to other than 0 seconds for incoming calls, the service works
after the Public mode guidance.
※
2 When the other party notifies you of the phone number, Public mode works.
≥
Public mode does not work to the calls from the party set to be rejected by Nuisance
Call Blocking Service.
1
Press and hold
a
for at least one second.
Public mode is activated and “ ” is displayed.
When a call comes in, the guidance “The person you are calling is currently driving
or in an area where cell phone should not be used. Please try again later.” is played
back for incoming calls.
≥
To deactivate Public mode, perform the same operation. Then, Public mode is
deactivated and “
” disappears.
Using Public Mode
Using Public Mode (Drive Mode)
Information
≥
You can activate/deactivate Public mode only from the Stand-by display. You can
activate/deactivate Public mode even when “
” is displayed.
≥
You can make calls as usual even during Public mode.
≥
If you make an emergency call at 110/119/118, Public mode is released.
≥
When Public mode and Manner Mode are activated simultaneously, Public mode has
priority.
≥
If a “User unset” call comes in while “Caller ID request” is set to “Activate”, the Caller
ID Request guidance is played back. (The Public mode guidance is not played back.)
≥
You cannot use this function during data communication.
・ Even when a call comes in, the ring tone does not sound. The “Missed call” icon
appears on the display and the call is stored in “Received calls”. The guidance is
played back to the caller to the effect that you are currently driving or in an area where
mobile phones should not be used. Then the call is disconnected. When a PushTalk
call comes in, no answer is made and the message “Connection failed” appears on the
caller’s display. For the talk among three or more members, the message to the effect
that you are driving is conveyed to them.
However, when the power is off or “
” is displayed, the caller hears the
out-of-service area guidance instead of the Public mode guidance.
・
The ring tone does not sound and the Call/Charging indicator does not flicker even
when mail or a message comes in. In addition, the set vibrator does not work.
・ The ring tone for 64K data communication, alarm tone, charging confirmation tone, the
ring tone for i-
α
ppli call and effect tone at the start of i-Widget do not sound, and a
melody while an i-
α
ppli program is running is not played back.
・ The tickers of i-Channel are not displayed.
・
See page 70 for how Public mode (Drive mode) and each network service work for
incoming calls when they are simultaneously activated.
Public mode (Power off) is an auto-answer service that puts importance
on manners in public spaces. Once you activate Public mode (Power off),
the guidance is played back telling that you cannot answer the call as
you are currently in a place where the power should be turned off
(hospital, airplane, around priority seat in a train, etc.). Then the call is
disconnected.
1
Enter “
:
25251”
1
d
Public mode (Power off) is set. (Nothing is changed on the Stand-by display.)
After setting Public mode (Power off) and turning off the power, the guidance “The
person you are calling is currently in an area where use is prohibited. Please try
again later.” is played back for incoming calls.
≥
To release Public mode (Power off), dial “
:
25250”.
≥
To check the setting for Public mode (Power off), dial “
:
25259”.
When Public mode (Drive mode) is activated
Using Public Mode (Power Off)