Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 73 / 617

71
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
The setting stays activated until you dial “
:
25250” to deactivate Public mode (Power
off). You cannot deactivate the setting just by turning on the power.
The guidance is played back to the caller telling that you are currently in a place where
you should turn off the power. Then the call is disconnected. When a PushTalk call
comes in, no answer is made and the message “Connection failed” appears on the
caller’s display. For the talk among three or more members, the message to the effect
that you do not participate is conveyed to them.
The Public mode (Power off) guidance is played back even when you are out of the
service area or out of reach of radio waves.
・
See page 70 for how Public mode (Power off) and each network service work for
incoming calls when they are simultaneously activated.
When you could not answer calls (Missed calls), the “Notification icon”
appears on the Stand-by display. You can check Received Calls by
selecting the icon.
1
O o
1
O o
( )
≥
Press
h
or
r
to return
to the former display.
≥
When multiple icons are
found, use
M o
to highlight
an icon and press
O o
( ).
≥
See page 33 for when the FOMA terminal is closed.
When Public mode (Power off) is activated
<Missed Calls>
When You could not Answer an Incoming
Call
Notification icon
By activating Record Message, you can play back an answer message to
incoming calls and record callers’ voice/video messages when you
cannot answer them even if you have not signed up for Voice Mail
Service.
You can record up to five messages for voice calls and up to two
messages for videophone calls. Each message can be recorded for up to
20 seconds.
1
m
1
LifeKit
1
Rec. msg/voice memo
1
Record message setting
1
ON or OFF
1
Select an answer message.
≥
Press
l
( ) to play back the answer message. Press
r
to end the
demo playback.
≥
When “Japanese 1”, “Japanese 2”, or “English” is set, a beep sounds after
playing back the answer message to the other party. If “Voice announce” is set,
the beep does not sound.
2
Enter a ring time (seconds).
≥
Enter from “000” through “120” in three digits.
≥
You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
≥
While Record Message is activated, “ ” 〜 “ ” (the number of recorded
messages for voice calls) and “ ”
〜
“ ” (the number of recorded messages
for videophone calls) are displayed.
+ m - 5 - 5
<Record Message Setting>
Recording Voice/Video Messages when
You cannot Answer a Call
Activate Record Message