Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 347 / 617

345
Da
ta
Ma
n
a
ge
m
e
nt
1
Still Image list/Still image in play
1
i
( )
1
Edit picture
≥
When the still image is larger than Stand-by (480 x
854), it is reduced to Stand-by (480 x 854) or smaller.
2
i
( )
1
Edit the still image.
See page 345 to page 347 for how to operate.
3
O o
( )
1
YES or NO
YES . . . Overwrites the image to save.
NO . . . . Saves the image as a new still image.
≥
When you edit a still image on the microSD card, you cannot overwrite it for
saving.
Press
O o
( ) to save it to the folder in which its source file is stored. If files
on the microSD card are stored to the maximum and you cannot save a new file,
it is saved to the “i-mode” folder.
≥
Not to save the edited still image, press
r
or
h
; then select “YES”.
≥
See page 210 when images are stored to the maximum.
<Edit Picture>
Editing Still Images
Edit Picture display
Information
≥
You can execute “Edit picture” only for the “File unrestricted” JPEG files of still images
shot by the cameras, obtained by data communication, downloaded from sites, or
retrieved from i-mode mail.
≥
When you select “Edit picture” while playing back a still image whose display direction
is switched, it returns to the original direction.
≥
You cannot edit some still images, or you might have difficulty to produce editing
effect.
≥
If you repeat editing image, the image quality may deteriorate or the file size may
become larger.
≥
You may not be able to edit some still images after their sizes are changed.
≥
The file name, title, storage location, and acquired source of the newly saved still
image are as follows:
・
File name: “YYYYMMDDhhmmnnnn”
Title: “YYYY/MM/DD hh:mm”
(Y: year, M: month, D: date, h: hour, m: minute, n: number)
・
Storage location: A folder in which its source file is stored
・ Acquired source: Same as its source file
Function Menu of the Edit Picture Display
Information
Marker stamp You can add a marker stamp in the “Flame/Stamp” folder.
1
Select a marker stamp.
≥
You can add a marker stamp whose size is smaller than the
image you are editing.
≥
You can rotate the marker stamp by pressing
i
( ) and
selecting “90° to right/90° to left/180°”. Select “Scale up/Scale
down” to enlarge or shrink the marker stamp.
≥
You can reselect a marker stamp by pressing
l
( ).
1
Use
M o
to position the marker stamp and press
O o
( ).
≥
You can add a marker stamp by pressing
l
( ).
1
O o
( )