Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 382 / 617

380
Dat
a Man
agem
ent
<Edit folder name>
≥
You cannot edit the Folder-Security-activated folder name.
<Delete folder>
≥
All data files in the user folder are deleted.
≥
When you select this function on the microSD card, “Delete this” is performed.
≥
When a melody set for another function is deleted, the setting returns to the default.
(When the melody is set for an alarm tone of “Schedule”, “ToDo” or “TV timer”, or for
“Alarm”, it switches to “Clock Alarm Tone”.)
<Folder security>
≥
You can set it only for “i-mode”, “Camera”, user folder, and “Voice recorder”.
≥
When you select a folder with folder security, the display for entering your Terminal
Security Code appears. Enter your Terminal Security Code to temporarily release
folder security.
<Edit playlist>
≥
If you change or delete the file name, title, or contents of the melody stored in the
playlist, all the melodies are released from the playlist.
<Select storage>
≥
The following icons are displayed for the folder set as a destination folder:
“
” . . . Folders in the “Picture” folder and “SD video” folder
“ ” . . . Folders in “Document viewer”, and “SD other files”
Folders in the “Deco-mail pictograms” folder, “Image Box” folder, “Movie”
folder, “Melody” folder, and “My documents” folder
“ ” . . . Folders in the “Kisekae Tool” and “Machi-Chara”
Folders in the “Movable contents” folder
“ ” . . . Folders in the “Other contents” folder
≥
When you execute Check microSD, or create or edit a folder by using a personal
computer, the destination folder on the microSD card might be changed. When the
setting is changed, set the destination folder again.
Information
The FOMA terminal conforms to IrMC™ version 1.1 standard.
You can exchange data files with the devices supporting the infrared
communication function. However, you cannot exchange some files
depending on the other party’s device.
≥
The distance for infrared communication should be within about 20 cm. Do not move
the FOMA terminal with the infrared data port pointed to the receiving end until data
transfer ends.
≥
Hold the FOMA terminal with your hands securely so that it does not move.
≥
If you expose the FOMA terminal to direct sunlight or put it under fluorescent lights or
near an infrared equipment, you may not be able to transmit infrared ray normally due
to their influence.
≥
First set at the receiving end and begin sending data from the sending end within 30
seconds.
≥
During exchange, the FOMA terminal is placed in the same state as it is out of the
service area, so you cannot make/receive voice calls, videophone calls or PushTalk
calls, use packet communication such as i-mode or mail, or use data communication.
Using Infrared Communication
Infrared data port
Within ±15°
from the center
Within about
20 cm