Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 193 / 617

191
Mai
l
1
Reception Result display
1
Mail
1
Select an SMS message to be
displayed.
≥
Press and hold
N o
for at least one second from the
detailed SMS display to change the size of characters.
(See “Mail” on page 121)
When SMS messages arrive at the SMS Center, they are automatically
sent to your FOMA terminal, but will be held at the SMS Center if your
FOMA terminal cannot receive messages such as when it is off or out of
the service area.
You can receive the messages by “Check new SMS”.
1
l
1
Check new SMS
2
Return
If the Center holds SMS messages, the FOMA terminal automatically receives
them.
Display Newly Received SMS Messages
Information
≥
Depending on the characters entered in the received SMS message, spaces might be
displayed.
≥
While the sender’s address (phone number) is highlighted in the displayed SMS
message, you can press
* O o
( ) to make a voice call, videophone call, or
PushTalk call to the displayed number (the Phone To/AV Phone To function).
Further, if the sender’s phone number is stored in the Phonebook, the stored “name”
is highlighted. In this case, you can dial the phone number in the same way.
≥
A Short Mail message is received as an SMS message on the FOMA terminal. When
the sender does not notify you of the phone number, the reason is displayed in the
sender’s field.
<Check New SMS>
Checking New SMS
Information
≥
Some SMS messages are not delivered immediately after checking.
You can set whether to request an SMS report for when sending an SMS
message.
The SMS report lets you know that your SMS message was delivered to
the destination.
You can check received SMS reports in the “Inbox” folder.
1
l
1
SMS settings
1
SMS report request
1
ON or OFF
≥
When you operate from the Function menu of the SMS Composition display, the
setting is effective only for the SMS message you are composing.
You can set the period that the SMS Center holds an SMS message sent
but unsuccessfully delivered due to the out-of-service area, etc.
1
l
1
SMS settings
1
SMS validity period
1
Select a holding period.
≥
If you select “None”, the stored SMS message is re-sent after a certain period of
time and deleted from the SMS Center.
≥
When you operate from the Function menu of the SMS Composition display, the
setting is effective only for the SMS message you are composing.
≥
When “ (dark blue)” or “ (dark blue)”, etc. are displayed, you cannot receive any
more SMS messages. Delete unnecessary mail, read unread mail, or release
protection. (Read and unprotected messages are automatically deleted from the
oldest one.)
≥
You cannot use this function to receive i-mode mail or Messages R/F. Use “Check
new messages” to receive i-mode mail or Messages R/F.
<SMS Settings>
Setting SMS
SMS Report Request
Information
SMS Validity Period