Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 81 / 617

79
Vo
ice
/V
id
e
o
pho
ne
Cal
ls
/P
u
sh
Ta
lk
You can operate your FOMA terminal from an external device such as
your personal computer for making or receiving videophone calls by
connecting them using the FOMA USB Cable with Charge Function 01/02
(option).
To use this function, you need to install a videophone application
program on a dedicated external device or personal computer, and
further, you need to prepare equipment (commercial item) such as an
earphone/microphone or USB compatible web camera.
≥
For operating environments for a videophone application program and how to set or
operate it, refer to the instruction manual or other literature for an external device.
≥
You can use “ ドコモテレビ電話ソフト (DOCOMO Videophone Software)” as the
application program that supports this function.
You can download “
ドコモテレビ電話ソフト (DOCOMO Videophone Software)”
from the DOCOMO website.
Information
≥
If you have not signed up for Voice Mail Service or Call Forwarding Service, “Packet
downld priority” works even if you set to “V.phone answerphone” or “Call forwarding”.
Using Videophone Calls by Interfacing to
External Devices
Information
≥
You cannot make a videophone call from the external device during a voice call.
≥
When you have signed up for Call Waiting Service, an incoming videophone call from
an external device during a voice call is recorded as a missed call in Received Calls.
The same applies for an incoming voice call, videophone call, and 64K data
communication during a videophone call from an external device.
You can use the inside camera of the FOMA terminal as a monitoring
camera to observe the remote location from a phone that has the
videophone function based on 3G-324M. While “Remote monitoring” is
set to “ON”, the FOMA terminal automatically starts Remote Monitoring
when it receives a videophone call from a phone number stored as
“Other ID” of “Remote monitoring”.
(The FOMA terminal needs to be set to Normal Style.)
1
m
1
Set./Service
1
Videophone
1
Remote monitoring
1
Enter your Terminal Security Code.
≥
To release Remote Monitoring, select “Set”, then select “OFF”.
2
Other ID
1
<Not recorded>
1
Enter a phone number.
≥
To change, select the stored phone number.
≥
You can enter up to five phone numbers of up to 26
digits by using numerals, #,
:
, and +.
≥
To return to the setting display for Remote Monitoring, press
r
from the Other
ID list after storing phone number.
3
Ring time
1
Enter a ring time (seconds).
≥
You can enter the time from “003” through “120” in three digits until Remote
Monitoring starts after receiving a videophone call.
≥
You cannot set the same ring time for Remote Monitoring, Auto Answer Setting
and Record Message Setting. Set a different time for each.
4
Set
1
ON
≥
When receiving videophone calls from the phone numbers stored as “Other ID”,
the FOMA terminal automatically answers to start Remote Monitoring after the
ring time elapses.
≥
“ ” is displayed while this function is set to “ON”.
≥
You cannot set to “ON” in Manner Mode.
<Remote Monitoring>
Checking inside of a Room when You are
Out
Other ID list