Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 133 / 617

131
Securi
ty S
e
tt
in
gs
You can set the way to release Personal Data Lock and IC Card Lock.
1
m
1
Set./Service
1
Lock/Security
1
Lock setting
1
PIM/IC security mode
1
Enter your Terminal Security Code
1
Select a security mode.
Security code . . . . . Enter your Terminal Security Code to release the lock. The
setting is completed.
Face reader. . . . . . . Use Face Reader authentication to release the lock.
Double security . . . Enter your Terminal Security Code to release the lock after
using Face Reader authentication. The setting is completed.
2
YES
PIM/IC Security Mode
Information
≥
You cannot change PIM/IC Security Mode when the face data files stored by Face
Reader Setting are fewer than three, or during Personal Data Lock or IC Card Lock.
You can store your face data files in Face Reader and use it for
authentication when releasing IC Card Lock or Personal Data Lock. To
use Face Reader, you need to store three or more face data files and set
“PIM/IC security mode” to either “Face reader” or “Double security”.
■ Notes on using Face Reader
≥
The dirty camera might result in erroneous operation. Use this function after wiping it
with a soft cloth to clean the dirt off.
≥
In environment where the face is exposed to strong light and the brightness
significantly differs depending on the region of the face, the face will not be recognized
easily. In this case, storing might become difficult or the recognition rate (the rate of
correct identification) might be lowered. Adjust so that the face is exposed to even light.
≥
The face might not be recognized normally when its entire part is exposed to the light
and becomes white.
≥
Storing the face might become difficult or the recognition rate might be lowered when
the face conditions are as described below:
・ When the features of the face (eyes, mouth, nose, and eyebrows, etc.) are hard to
see as they are covered by hair, glasses, or a mask
・
When the brightness significantly differs depending on the region of the face such as
when you are under the light in a dark place
≥
The recognition rate might rise by reacting in accordance with the face conditions such
as by raising the hair so that the eyes, nose, mouth, and eyebrows are clearly visible
(taking the glasses and mask off) or moving to a place where the face is exposed to
even light. The recognition rate rises also by storing the face data file additionally.
≥
The face authentication technology does not completely guarantee that you are
recognized as yourself. Accordingly, we are not at all responsible for damages
resulting from the use of this product by a third party or when the damages are caused
by what you could not use the function because of wrong authentication by Face
Reader.
<Face Reader Setting>
Using Face Reader