Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 378 / 617

376
Dat
a Man
agem
ent
By connecting the microSD card to the microSD card adapter, you can
use the microSD card on a personal computer which supports SD card.
The microSD card adapter is available at electronics retail stores, etc.
For installing the microSD card adapter, refer to the instruction manual
for the microSD card adapter.
With a microSD card inserted, connect the FOMA terminal to a personal
computer; then you can read the data from or write the data onto the
microSD card.
The following equipment is required:
≥
Connector Cable: FOMA USB Cable with Charge Function 01/02 (option)
≥
Personal Computer: Personal computer having the USB port (Universal Serial Bus
Specification Rev 1.1/2.0
※
compliant) that can be connected with
the FOMA USB Cable with Charge Function 01/02 (option)
※ This FOMA terminal does not support “USB2.0 High-Speed”.
≥
Compatible Operating Systems: Windows 2000, Windows XP, Windows Vista
(Japanese version in each)
1
m
1
Set./Service
1
Other settings
1
USB mode setting
1
microSD mode
≥
When you set to “microSD mode”, “ ” appears on the Stand-by display.
≥
To save WMA files from your personal computer to the microSD card, set to
“MTP mode”. When you set to “MTP mode”, “
” appears on the Stand-by
display.
≥
To use the FOMA terminal for packet communication, 64K data communication,
data sending/receiving (OBEX™ communication), and for calls with USB
Hands-free compatible device, set mode to “Communication mode”.
2
Connect the FOMA terminal to a personal computer
using the FOMA USB Cable with Charge Function 01/02
(option).
The personal computer recognizes the microSD card.
≥
“ ” appears on the desktop, and “ ” appears on the Stand-by display.
Also, “ ” is displayed while the microSD card is in the FOMA terminal.
Using a microSD Card with a Personal
Computer
Use FOMA Terminal as microSD Reader/Writer
The FOMA terminal creates the following folders on the microSD card to
save data files. When you write files to the microSD card from a personal
computer, you need to write in the specified folder configuration and file
names.
aaa: A three-digit half-pitch numeral of 100 through 999 (Use the same numerals for the
folder name, and for the file name saved to that folder.)
bbb: A three-digit half-pitch numeral of 001 through 999
ccc: A three-digit half-pitch alpha-numeral (hexadecimal numeral
※
)
ddddd: A five-digit half-pitch numeral of 00001 through 65535
eeee and ffff: A four-digit half-pitch alpha-numeral (hexadecimal numerals
※
)
gggg: A four-digit half-pitch numeral of 0001 through 9999
###: Extension
※ The hexadecimal numerals are carried up every 16, unlike the way the decimal
numerals are carried up every 10. They are indicated by half-pitch numerals of 0
through 9 and half-pitch alphabets of A through F.
≥
Using a personal computer, you can write a file name of up to 64 bytes (including
extension) of free characters for a PDF file, SD other file, movie file, Word file, Excel file
and PowerPoint file. However, you cannot use following characters:
￥ / , : ;
＊
? “ < > ｜
Information
≥
If the FOMA terminal and personal computer are not correctly connected, or the
remaining battery level of the FOMA terminal shows very low or goes flat, you cannot
send or receive data. In addition, you may lose data.
≥
While data is being read or written, do not pull the FOMA USB Cable with Charge
Function 01/02 off. Not only you cannot send or receive data, but also you may lose
the data.
≥
While data is being read or written, you cannot set this function. Further, make sure
that you do not “Reset settings” or “Initialize” during reading/writing. Malfunction of the
microSD card could result.
≥
When “MTP mode” is set, you cannot reset functions by “Reset settings”. When you
turn on the power after removing the battery, the mode is set to “Communication
mode”.
≥
You cannot read from/write to a personal computer while reading from/writing to the
FOMA terminal, and vice versa.
≥
To use the DOCOMO keitai datalink, set it to “Communication mode”.
Folder Configuration on microSD Card