Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 442 / 617

440
Network
Servi
ces
You can connect an incoming call to the Voice Mail Service Center just by
a simple key operation. Even if you do not set Voice Mail Service to
“Activate”, the service will be available using this function.
1
During ringing
1
i
( )
1
Voice mail
≥
You can connect the incoming call to the Voice Mail Service Center also by
pressing
i
( ), and pressing
s
.
You can automatically connect the calls coming from the phone numbers
stored in the Phonebook to the Voice Mail Service Center regardless of
the Activate/Deactivate setting for the Service.
You can specify up to 20 phone numbers.
This setting is valid only when the caller notifies his/her phone number.
It is advisable to activate “Caller ID request” at the same time.
1
Detailed Phonebook display
1
i
( )
1
Restrictions
1
Enter your Terminal Security Code
1
Voice mail
“Voice mail” is indicated by “ ★ ”.
≥
To release “Voice mail”, perform the same operation.
Forward an Incoming Call to Voice Mail Service Center
during Ringing
Forward Specified Calls to Voice Mail Center
Information
≥
When a call comes in from the phone number set with this function, the ring tone
sounds for about one second and then the call is connected to the Voice Mail Service
Center. You will be notified of the call by the icons on the desktop (see page 30 and
page 71) and “Received calls”.
≥
Even if you set this function, all incoming calls are not connected to the Voice Mail
Service Center when you set “Personal data lock” while Voice Mail Service is
deactivated.
However, when you set “Phonebook available” to “Accept” for “Customize” of
Personal Data Lock, calls from the specified phone numbers are connected to the
Voice Mail Service Center even during Personal Data Lock.
When a call comes in during a call, this service notifies you of it by the
ring tone in call, and enables you to place the current call on hold to
answer the new call.
Further, you can make a call to another person putting the current call on
hold.
≥
To use Call Waiting Service, set “Arrival call act” (see page 445) to “Answer” in
advance. When another option is set, you cannot answer a voice call during a voice
call even if you set “Call waiting” to “Activate”.
1
m
1
Set./Service
1
NW services
1
Call waiting
1
Do the following operations.
1
Another call comes in during a call
1
d
The current call is automatically put on hold so that you can receive another call.
≥
“Multi calling” is displayed when there is the party on hold.
≥
Each time you press
d
, you can switch the parties you can talk with.
<Call Waiting>
Using Call Waiting Service
Use Call Waiting Service
Activate
1
YES
Deactivate
1
YES
Check setting You can check the setting contents of Call Waiting Service.
Answer an Incoming Call during a Call