Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 254 / 617

252
1S
e
g
2
YES
1
Enter a title.
≥
You can enter up to 11 full-pitch/22 half-pitch characters.
≥
When you press
O o
( ) without entering a title, the title name takes the
name of “YYYY/MM/DD hh:mm”. (Y: year, M: month, D: date, h: hour, m: minute)
≥
To cancel searching midway, press
l
( ) or
r
; then select “YES”. You
can store the searched broadcasting stations in a channel list.
You can store the broadcasting stations set by prefecture to a channel
list.
1
m
1
1Seg
1
Channel setting
1
Select area
1
Select an area
1
Select a prefecture
1
YES
≥
From the Channel list display, press
i
( ), select “Channel setting” →
“Select area”.
From the viewer display, press
i
( ), select “Disp.Ch. /operation” →
“Channel setting” → “Select area”.
Information
≥
When the multiple broadcasting stations which have the same remote-control number
are retrieved, the message to the effect that the remote-control number is doubled
appears. Select “OK” and select your area from the Local Area Selection display. The
channels in the area you select are preferentially assigned to remote-control numbers
1 to 12, and channels in the area you do not select are assigned to remote-control
numbers 13 onward.
≥
The time to search channels requires for about 30 to 50 seconds. However, it differs
depending on the number of broadcasting stations or airwave conditions, and might
exceed 100 seconds.
Select Area
Information
≥
Depending on the area, you may not be able to correctly store the broadcasting
stations by “Select area”. In that case, search for the broadcasting stations by “Auto
channel setting”.
You can select a channel list to set the broadcasting stations you receive.
Also, you can edit the channel list already stored.
1
m
1
1Seg
1
Channel list
1
Select a channel list.
The channel list you receive
is set, and the detailed
display appears.
≥
Select a broadcasting
station to watch a 1Seg
program.
≥
When you select “Disp.Ch.
/operation” from the
Function menu of the
viewer display and select “Channel list”, the viewer display returns after you
select a channel list.
≥
You can watch a 1Seg program also by pressing
l
( ) from the Channel
list display and selecting a broadcasting station.
Select Channel List
Channel list display Detailed Channel list
display
Remote-control number
Function Menu of the Channel List Display
Channel setting See page 251.
Edit title
1
Enter a title.
≥
You can enter up to 11 full-pitch/22 half-pitch characters.
Delete
1
YES
≥
You cannot delete the channel list currently set.
Function Menu of the Detailed Channel List Display
Remote control No. You can change the broadcasting station set for the
remote-control number.
1
Select a broadcasting station you want to change
1
Select the remote-control number to be set.
≥
If any broadcasting station has already been set for the
specified remote-control number, the broadcasting stations
switch positions. Repeat the operation to set a broadcasting
station for a remote-control number.
1
l
( )
1
YES