Docomo P-07A Prime Series, Инструкция по эксплуатации

Страница: 588 / 617

23
8
Confirm that “OK” appears on the
display.
9
“ ファイル (File)” menu
1
Select “ ハイパーターミナルの終了 (Exit Hyper
Terminal)” to exit Hyper Terminal.
≥
If the message “ 現在、接続されています。切断してもよろしいですか? (Currently connected. Do you want to disconnect this
line?”) appears, select “ はい (Yes)”.
≥
The message “ セッションXXXを保存しますか? (Do you want to save session XXX?)” then appears. You do not need to
especially save that session.
Information
≥
The access point name (APN) is information to be registered in the FOMA terminal, so if you connect another FOMA terminal, you need
to register the access point name (APN) again.
≥
To continue using the access point name (APN) of the personal computer, register the same access point name (APN) for the same cid
number in the FOMA terminal.
≥
If the entered AT command is not displayed, enter “ATE1 ”.
■ cid (Registration number)
The FOMA terminal has registration numbers, cid1 through cid10. cid1 contains “mopera.ne.jp” and cid3 contains “mopera.net” as an
access point name (APN) by default. To connect to a provider other than “mopera U” or “mopera”, you need to set the access point name
(APN) to one of cid2 or cid4 through cid10 as specified by the provider or network administrator.
Default cid contents
■ “Phone number” for connecting to an access point name (APN) you register in cid
“
¢
99
¢¢¢
<cid No.>#”
(Example) When connecting to the access point name (APN) you register in cid2, enter the following:
¢
99
¢¢¢
2#
■
Resetting/Confirming the access point name (APN) settings
You can use AT commands to reset/confirm the access point name (APN) settings.
Resetting access point name (APN)
The access point name (APN) for cid1 returns to “mopera.ne.jp” (default) and for cid3 returns to “mopera.net” (default); the settings for
cid2 and cid4 through cid10 are reset to being unregistered if you reset them.
(Entry method)
AT+CGDCONT=
(When resetting all the cid contents)
AT+CGDCONT=<cid> (When resetting only a specific cid)
Confirming access point name (APN)
The currently specified access point name appears on the display.
(Entry method)
AT+CGDCONT?
Registration No. (cid) Access point name (APN)
1 mopera.ne.jp (mopera)
2 Not set
3 mopera.net (mopera U)
4 to 10 Not set