Detnov CAD-250, Руководство по установке

Страница: 66 / 84

ENG
66
The CAD-250 control panel was designed, manufactured and certified in
accordance with the subsections of the following European standards:
EN 54-4:1997,
EN 54-4:1997/AC:1999,
EN 54-4:1997/A1:2002,
EN 54-4:1997/A2:2006
EN-54-4
SUBSECTION
General requirements 4. PASS
Functions
5. PASS
Materials, design and manufacturing
6. PASS
Documentation
7. PASS
Marking
8. PASS
Cold (operational)
9.5 PASS
Damp heat, steady state (operational)
9.6 PASS
Impact
9.7 PASS
Vibration, sinusoidal (operational)
9.8 PASS
Electrostatic discharges (operational)
9.9 PASS
Damp heat, steady state (endurance)
9.14 PASS
Vibration, sinusoidal (endurance)
9.15 PASS
8. TECHNICAL SPECIFICATIONS
This fire control panel was designed, manufactured and certified in
accordance with the subsections of the following European standards:
EN 54-2:1997,
EN 54-2:1997/AC:1999,
EN 54-2:1996/A1:2006
EN-54-2
SUBSECTION
General requirements 4. PASS
General requirements for the indications
5. PASS
Standby state
6. PASS
Fire alarm state
7. PASS
Fault warning state (annex F) 8. PASS
Disconnected state
9. PASS
Test state (option with requirements)
10. PASS
Design requirements
12. PASS
Additional design requirements for control and
indication units controlled by the software
13. PASS
Marking
14. PASS
Cold (operational)
15.4 PASS
Damp heat, steady state (operational)
15.5 PASS
Impact (operational)
15.6 PASS
Vibration, sinusoidal (operational)
15.7 PASS
EMC immunity
15.6 PASS
Variation of the supply voltage
15.13 PASS
Damp heat, steady state (endurance)
15.14 PASS
Vibration, sinusoidal (endurance)
15.15 PASS