3
4
SOLAR CONTROLLER
User-Manual
Model No.:
CL12/2410LI-A
1. DESCRIPTION
CL12/2410LI-A is solar controller for LED solar street light. This solar light controller is integrated with
LED driver, so the led light can’t have LED driver. And this also can save the cost of Led driver. The
maximum conversion efficiency reaches 96%. The output current can be adjusted for 4 time frames. With
fully sealed waterproof design and wide output voltage, the product applies to most LED solar street
lights.
2. FEATURES
1)
Adopt the integrating technology of control and constant current, and save the cost of the LED
drive power supply for users.
2)
Wide range of output voltage applies to the LED lights of a variety of series-parallel circuits.
3)
With the function of 4 time frames power regulation, Users can dim LED lamps’ output power.
4)
The controller adopts fully sealed waterproof design. The IP grade reaches IP67. The controller
can be used in the water.
5)
Flexible and adjustable working parameter makes the controller adapt to different solar systems.
6)
This controller can withstand from -35
℃
to 60
℃
high and low temperature, so it can adapt to
extreme temperature.
7)
CL12/2410LI-A has an optional function that the controller can automatically drop load’s power
when battery is lower than 12.5V/25V. This function let the lights work for longer days in rainy season.
8)
Another optional function of CL12/2410LI-A is the controller can adjust the working time
automatically in different seasons. In winter, the working time becomes long, while in summer, the
working time becomes short automatically.
3. INSTALLATION
1)
Connect the lamp to the controller;
2)
Connect the battery to the controller. At the moment, the IDLE indicator is on. After 30 seconds, the
lamp is turned on;
3)
Connect the solar panel to the controller. If at daytime, after 70 seconds, the CHARGE indicator is
on and the lamp will be turned off.
4. NOTES
1)
The controller is wide voltage output. Before using the controller, make sure the LED light can
match the controller.
2)
Please connecting wires in order. Wrong wire connection lead to system’s misjudgment and
controller’s damage.
5. INDICATORS
State
Idle
(green)
Charge
(green)
Discharge
(red)
Remarks
Idle
on
off
off
Normal
Charge
off
on
off
Normal
Discharge
off
off
on
Normal
finish discharging
on
on
off
Normal
