Detnov CAD-250, Руководство по установке

Страница: 52 / 84

ENG
52
5.7. MANOEUVRES
A manoeuvre can be defined as a set of actions that are programmed
on a control panel based on the statuses taken by the system, areas,
zones or devices.
Status changes are called events, and an action will be linked to each
event, such as the activation of sounders, relays, etc.
The process of programming a manoeuvre involves first defining the
event or events that must trigger the action and then associating the
action or actions.
Manoeuvres may have an associated delay (in seconds, 0 to 600
seconds) so that an immediate action can be avoided in case of a false
alarm. Consult the Advanced Configuration Guide for more details.
The following example creates a manoeuvre whereby in an event on
a control panel, an action will be executed on the same panel or on
another networked panel.
To programme a manoeuvre, carry out the following steps:
LOOP (Main menu) > DEVICES (Submenu) > +ADD (Navigation bar)
A floating window will let you select
between EVENT and ACTION .
For this example, press EVENT .
A new pop-up window will allow
you to select between
ENTITY and TIME CONDITION
For this example, press ENTITY .
From the new manoeuvre management window, press:
+ADD (Lower navigation bar)