Detnov CAD-250, Руководство по установке

Страница: 55 / 84

55
ENG
5.8. SOFTWARE UPDATE
One of the easiest ways to update the CAD-250 is via the USB TYPE
A port using a PEN DRIVE.
Make sure that the PEN DRIVE is formatted as FAT32; it is not
necessary for it to be empty.
Once the ZIP file that your supplier has sent to you is decompressed
and copied to the PEN DRIVE root, carry out the steps below.
1. Locate the USB type A port on the MAIN BOARD and insert the
PEN DRIVE.
If you are not in the administrator screen, enter the password to exit
the STANDBY screen.
A window will allow you to choose between two options:
COPY TO USB: Export the configuration and logs of a control panel.
INSTALL FROM USB: Import the different configurations available on
a PEN DRIVE, both the databases of each configuration and the
firmware or all.
2. To update the FIRMWARE press INSTALL FROM USB.
If the PEN DRIVE has configurations for different detection facilities,
you will be able to choose between them:
3. Press the Facility 1 button.