Detnov CAD-250, Руководство по установке

Страница: 50 / 84

ENG
50
The modes establish the behaviour according to a hierarchical structure
whereby the AREA is superior to the ZONE and this is superior to the DEVICE .
The behaviour due to the WORKING MODE of an AREA will affect the ZONES
and the
DEVICES
of each one, but this does not happen the other way round.
If an AREA is DISABLED , the ZONES contained by that AREA will be also, as will
the DEVICES contained by those ZONES .
If a ZONE is DISABLED , the devices contained within that ZONE will be also,
though the AREA that contains them will not.
If you DISABLE a DEVICE , this does not disable the ZONE or the AREA that
contains it.
Similarly, when you enable an upper hierarchy, the lower hierarchies will only
be disabled if they have not been individually configured in DISABLED mode.
It allows the sectorisation tree of the Area upper hierarchy to be
collapsed or expanded.
It allows the sectorisation tree of the Zones hierarchy to be
collapsed or expanded.
It allows view filters to be applied by type, description, mode or
status.
EN
UNE
ISO
5.6. SECTORISATION
From the SECTORISATION section on the main menu, it is possible to
create, review and modify the sectorisation tree.
INTRODUCTION TO SECTORISATION:
One of the fundamental design principles of a fire detection system
is the division of the facility into areas and zones, with the aim of
monitoring the indication of events and alarm inputs. The zones
allow better organisation of the devices in the facility, whether they
are installed in the same loop or not. This also allows you to change
the working mode of these locations (AREAS or ZONES).
There may be limits established by local regulations for the definition,
scope and coverage of the zones. Consult the project and local
standards, for e.g. UNE 23007-14, as well as any sector regulations
that may be applicable
Just like with the devices, it is possible to establish working modes for
ZONES/AREAS from the SECTORISATION section of the main menu.
ENABLED: the devices and their events are taken into account.
DISABLED: the devices in this zone/area are ignored.
TEST: useful for carrying out maintenance tasks without the alarm going
off.
Main Menu
Submenu Main View