Detnov CAD-250, Руководство по установке

Страница: 44 / 84

ENG
44
5. QUICK CONTROL PANEL CONFIGURATION
The purpose of this section is to carry out a simple initial start-up
by configuring basic parameters for both the control panel and the
elements (devices, loops, networks), so that you can check the correct
operation of the panel and the facility.
If you would like detailed information on how to use and configure the
control panel, please consult the Advanced Configuration Guide.
5.1. ADMINISTRATOR ACCESS
Once the system has started up, you will see the following screen,
called the STANDBY SCREEN.
This screen shows the time and date in the UPPER BAR, the CONTROL
PANEL NAME and a padlock.
This screen will remain provided if the system does not detect any
event (alarm, fault or technical event).
Touch the touchscreen with your finger over the padlock icon ( 🔓 ). By
doing so, you will access the ACCESS SCREEN, requesting the access
code and password.
Depending on the password entered, certain configuration
parameters will not be available to prevent improper use of the
system.
Make sure you have the necessary authorisation and knowledge to
operate this control panel as an administrator, otherwise do not use this
level without the supervision of an authorised person.
⚠
WARNING!: The improper or negligent use of the access level with
ADMINISTRATOR PRIVILEGES may cause a malfunction of the facility
that can cause the loss of human lives.
Enter the administrator password by default,
2222