Detnov CAD-250, Руководство по установке

Страница: 47 / 84

47
ENG
5.4. LOOP AUTOSEARCH
When starting the system up for the first time, it should recognise the
devices installed in the loops. You can perform this action automatically
via the LOOP AUTOSEARCH feature.
LOOP ( Main menu ) > AUTOSEARCH (Submenu)
The main view will show the loops installed in the control panel. Select
the loops that you wish to synchronise; when you do this for the first
time, you should select them all.
Press ,
START to begin the search process.
Alternatively, the button
lets you select all the loops or delete
the entire selection.
A progress bar will be shown in the main view.
When the process is complete, the view will show the result of the
devices found in each loop, once completed, the main view will show
the devices found for each loop with detailed information of each type
under the navigation bar.
Main Menu
Submenu
Main View
Use the cursors to view all of the devices found
Press , SAVE to update the database.
Press , CANCEL to undo the proposed changes.
The switch lets you limit the display to the elements
found after the search. If the option is deactivated, it will show all possible
addresses for each loop.