Detnov CAD-250, Руководство по установке

Страница: 20 / 84

ENG
20
Ventilation airflow of the CAD250 cabinet
5 MAIN BOARD
The MAIN BOARD contains the main processor, CPU, fuses,
electronics, expansion connectors and stores the loop cards.
Avoid any metal contact with any part of this card when it is powered
or it could cause irreversible damage to the unit.
6 BATTERY CONNECTOR
When you connect the battery cable terminal, make sure this
connector has a specific connection position; do not force it as you
could damage the main board.
7 POCKET FOR THE INSERTABLE LANGUAGE CARD
This is where the language card is fitted. From the front, you will see,
once you have inserted the card, the legends that accompany the
LEDs and control keys and primary LEDs (see sections 3.2 and 4.2).
3. CONNECTION GUIDE
3.1. INTERNAL PARTS
Before making any type of connection, identify the internal parts of the
control panel and familiarise yourself with their location.
To open the door, you will need to unlock its lock. Use the keys supplied
with the CAD-250 control panel (see page 10).
The person responsible for the facility must know where these keys
are in order to access the interior of the control panel.
1 AC AND FUSE MAIN CONNECTOR
This is the main current input to the control panel. The main input
cable for the 230 Vac power supply must be connected to this power
supply terminal block (power supply fuse) located on the upper right
part of the box.
2 MAIN BOARD PROTECTION
Protect the MAIN BOARD from contact with metal elements or
from damage. To proceed with the placement of the loop cards, it
is necessary to remove it and replace it once you have finished the
installation.
3 POWER SUPPLY
Convert the mains power (230 VAC) into direct current (24 V) and
stabilise it. The control panel power supply is cooled passively, so it
is important that its air circulation is not impeded. Do not place the
surplus coiled cable on the upper area of the power supply support,
instead leave the exact cable plus 10 cm.
4 ADDITIONAL CARD SUPPORT
This board protects the power supply and serves as a support for
the AC connector, as well as being the fixing point for ADDITIONAL
CARDS. Additional cards are supplied with the necessary elements
to fix and connect them.