Delta ASD-M-0721 Series, Руководство пользователя

Страница: 289 / 645

Chapter 8 Parameters ASDA-M
8-58
Revision December, 2014
NOTE
1) When the source of speed command is analog, and P1-36 is
set to 0, it will disable S-curve function.
2) When the source of speed command is analog, the max. range
of P1-34 will be set within 20000 automatically.
P1-35 TDEC Deceleration Constant of S-Curve
Address: 0146H
0147H
Parameter
Attribute
：
Parameter for individual axis
Related Sections:
Section 6.3.3
Operational
Interface
：
Panel / Software Communication
Default
：
200
Control
Mode
：
S
Unit
：
ms
Range
：
1 ~ 65500
Data Size
：
16bit
Format
：
DEC
Settings
：
Deceleration Constant:
P1-34, P1-35 and P1-36, the deceleration time of speed
command from the rated speed to zero, all can be set individually.
Even when P1-36 is set to 0, it still has acceleration / deceleration
of trapezoid-curve.
NOTE
1) When the source of speed command is analog, and P1-36 is
set to 0, it will disable S-curve function.
2) When the source of speed command is analog, the max. range
of P1-35 will be set within 20000 automatically.
P1-36 TSL
Acceleration / Deceleration Constant of
S-Curve Address: 0148H
0149H
Parameter
Attribute
：
Parameter for individual axis
Related Section:
Section 6.3.3
Operational
Interface
：
Panel / Software Communication
Default
：
0
Control
Mode
：
S
，
PR
Unit
：
ms
Range
：
0 ~ 65500 (0
：
disable this function)